Rear Belt Anchor

Rear Belt Anchor

• Removal and installation are same for right and left.

Removing






- Remove the rear bench seat. Refer to => [ Bench Seat ] Bench Seat.

- Remove side trim. Refer to => [ Side Trim ] Side Trim.

- Vehicles with a subwoofer: remove the subwoofer.

- Remove the bolt - 1 - from the belt end fitting - 2 -.

Installing

Installation is reverse of removal, but note the following:

- If parts of the seat belt system are removed due to an accident, replace the belt system mounting bolts.

- The belt end fitting - 2 - must contact the threaded pin - arrow -.

For the correct tightening specifications, refer to => [ Rear Three-Point Seat Belt Assembly Overview ] Rear Three-Point Seat Belt Assembly Overview.