Front Belt Anchor

Front Belt Anchor

• Removal and installation are same for right and left.

Removing






- Move the front seat all the way forward.

- Pry the cap - 1 - off using a screwdriver.

- Remove the bolt - 2 - and the front belt anchor - 4 -.

Installing

Installation is reverse of removal, but note the following:

- If parts of the seat belt system are removed due to an accident, replace the belt system mounting bolts.

- Attach and tighten the front seat belt end fitting - 4 - together with the bushing - 3 - onto the bolt - 2 -.

For the correct tightening specifications, refer to => [ Front Three-Point Seat Belt Assembly Overview ] Front Three-Point Seat Belt Assembly Overview.