Supercharger, Securing to Engine/Transmission Holder

Supercharger, Securing to Engine/Transmission Holder

• The openings on the bottom of the supercharger housing should make it possible to see and reach the charge air cooler.

Special tools, testers and auxiliary items required

• Engine and Transmission Holder (VAS 6095)

• Gearbox Support (T40206)

Procedure






• Supercharger removed, refer to => [ Supercharger ] Supercharger.

- Mount the (T40206) with (T40206/1) in the (VAS 6095).

- Secure the supercharger to the transmission holder as illustrated. Use the holes "1", "4", "9", "11" and "13" for the threaded connectors - 1 -.

- Attach the support (T40206/2) directly to the supercharger housing at the front and on the right side using the bolt - 2 -.

Support (T40206/2) installed position:






• The seals - arrow 1 - on the support must face downward.

• It is possible to see and reach the charge air cooler through the openings - arrow 2 - inside the compressor housing.