Right Catalytic Converter

Right Catalytic Converter

Removing






• The transmission is removed.

• When installing, bring all cable ties back to same positions.

- Remove the - 1 - Oxygen Sensor (O2S) after Three Way Catalytic Converter (TWC) (G130) connector from the bracket, disconnect it and free up the wire.

• Ignore - 2 and 3 -.

- Remove the right catalytic converter.

• The right catalytic converter is already removed for removing the transmission.

Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ Muffler Overview ] Muffler Overview.

• Replace the seals and self-locking nuts.