License Plate Lamp: Service and Repair

License Plate Lamp Bulb (X4)/(X5)

Removing






- Turn the light switch into the "0" position.

- Remove the screw - arrow -.

- Pry the bulb carrier out of handle cover strip.

- Remove the bulb from the socket.

Installing

• Tightening specification, refer to => [ High Mount Brake and License Plate Lamp Overview ] High Mount Brake and License Plate Lamp Overview.

Install in reverse order.

Install in reverse order of removal. Note the following:

• If LED's are malfunctioning, license plate lamp must be completely replaced.