Low Beam Headlamp Bulb (M29)/(M31)

Low Beam Headlamp Bulb (M29)/(M31)

Removing






- Remove the headlamp. Refer to => [ Headlamp Housing ] Headlamp Housing.

- Release the spring clip - arrow - and remove the low beam/daytime running light bulb housing cover - 1 - from the headlamp housing.

- Turn the socket - 1 - counterclockwise - arrow - and remove it from the housing.






- Remove the bulb - 2 - from the socket.

Installing

Install in reverse order of removal, observing the following:

- Install the new bulb into the headlamp without touching the bulb with bare hands.

- Close the housing cover and secure it using the spring clip.

- Install the headlamp. Refer to => [ Headlamp Housing ] Headlamp Housing.