Bi-Xenon Headlamps With Cornering Lamp Overview, Through MY 2011
Bi-Xenon Headlamps with Cornering Lamp Overview, through MY 2011
Observe the notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.
• Headlamps must be adjusted after performing measures that could influence the headlamp adjustment. Refer to => [ HID Headlamp, Adjusting ] HID Headlamp, Adjusting.
1 Headlamp Washer System Spray Nozzle
2 Mount
• For the headlamp washer system washer fluid line.
3 Screw
• Tightening specification, refer to => [ Headlamp Housing Bracket and Mount Overview, through MY 2011 ] Headlamp Housing Bracket and Mount Overview, Through MY 2011.
4 Bracket
• Overview, refer to => [ Headlamp Housing Bracket and Mount Overview, through MY 2011 ] Headlamp Housing Bracket and Mount Overview, Through MY 2011.
5 Screw
• Tightening specification, refer to => [ Headlamp Housing Bracket and Mount Overview, through MY 2011 ] Headlamp Housing Bracket and Mount Overview, Through MY 2011.
6 Screw
• 1.4 Nm
7 Retaining Plate
• Removing and installing, refer to => [ Headlamp Power Output Stages (J667)/(J668) ] Headlamp Power Output Stages (J667)/(J668).
8 Screw
• 1.4 Nm
9 High Intensity Discharge (HID) Headlamp Control Module
• Left high intensity gas discharge lamp control module (J343).
• Right high intensity gas discharge lamp control module (J344).
• Removing and installing, refer to => [ HID Headlamp Control Module (J343)/(J344) ] HID Headlamp Control Module (J343)/(J344).
10 Sealing Ring
11 Headlamp Housing
• Removing and installing, refer to => [ Headlamp Housing ] Headlamp Housing.
• The left and right LED parking lamp/DRL modules (L176) / (L177) , the left and right low beam reflector motors (V294) / (V295) and the left and right dynamic cornering light motors (V318) / (V319) cannot be replaced separately.
12 Screw
• 4.5 Nm
13 Screw
• 4.5 Nm
14 Housing Cover
• For the front turn signal/parking lamp.
15 Front Turn Signal Lamp
• Left front turn signal lamp (M5).
• Right front turn signal lamp (M7).
• 12 V, 21 W (H21W)
• Bulb, replacing, refer to => [ Front Turn Signal Lamp Bulbs (M5)/(M7) ] Front Turn Signal Lamp Bulbs (M5)/(M7).
16 Lamp Socket
• For the front turn signal.
17 Parking Lamp Bulb
• Left parking lamp (M43).
• Right parking lamp (M44).
• Glass socket lamp 12V, 5 W.
• Bulb, replacing, refer to => [ Parking Lamp Bulbs (M43)/(M44) ] Parking Lamp Bulbs (M43)/(M44).
18 Lamp Socket
• For the parking lamp bulb.
19 Screw
• 4.5 Nm
20 Screw
• 4.5 Nm
21 Headlamp Bracket
22 Speed Nut
23 Ball Joint
• For the headlamp height adjustment.
24 Adjusting Nut
• For the headlamp height adjustment.
25 Sealing Ring
26 Headlamp Range Control Positioning Motor
• Left headlamp beam adjustment motor (V48).
• Right headlamp beam adjustment motor (V49).
• Removing and installing, refer to => [ Headlamp Beam Adjustment Motors (V48)/(V49), through MY 2011 ] Headlamp Beam Adjustment Motors (V48)/(V49), Through MY 2011.
27 Cover
• For the low beam.
28 High Intensity Discharge (HID) Lamp Bulb
• With integrated ignition coil.
• Left high intensity gas discharge lamp (L13).
• Right high intensity gas discharge lamp (L14).
• 42 V, 35 W (D3S).
• Bulb, replacing, refer to => [ HID Headlamp Bulbs (L13)/(L14) ] HID Headlamp Bulbs (L13)/(L14).
29 Lamp Socket
• For the front side marker lamp bulb.
30 Front Side Marker Lamp Bulb
• Left front side marker lamp (M33).
• Right front side marker lamp (M34).
• 12V, 5 W.
• Bulb, replacing, refer to => [ Front Side Marker Lamp Bulbs (M33)/(M34) ] Front Side Marker Lamp Bulbs (M33)/(M34).
31 Power Output Stage
• Only for vehicles with cornering lamps.
• Left headlamp power output stage (J667).
• Right headlamp power output stage (J668).
• Removing and installing, refer to => [ Headlamp Power Output Stages (J667)/(J668) ] Headlamp Power Output Stages (J667)/(J668).
32 Gasket
33 Screw
• Tightening specification, refer to => [ Headlamp Housing Bracket and Mount Overview, through MY 2011 ] Headlamp Housing Bracket and Mount Overview, Through MY 2011.
34 Speed Nut
35 Mount
• Overview, refer to => [ Headlamp Housing Bracket and Mount Overview, through MY 2011 ] Headlamp Housing Bracket and Mount Overview, Through MY 2011.
36 Screw
• Tightening specification, refer to => [ Headlamp Housing Bracket and Mount Overview, through MY 2011 ] Headlamp Housing Bracket and Mount Overview, Through MY 2011.
37 Screw
38 Front Airbag Crash Sensor
Headlamp Housing Repair Kit, Tightening Specification
- Tighten the bolts - 1 and 3 - to 6 Nm.