Vanity Mirror Illumination (L31)

Vanity Mirror Illumination (L31)

The bulbs for the vanity mirror illumination may be LEDs and it is not possible to replace them. The vanity mirror must be replaced completely.

Removing






- Move the sun visor - 2 - to the outside - arrow A -.

- Pry out the vanity mirror illumination - 1 - at the cut out - arrow B - using a flat blade screwdriver.

- Disconnect the electrical connector.

- Remove the cover - arrow - to replace the bulb.






- Remove the bulb from the socket on the rear side of the vanity mirror lamp.

Installing

Install in reverse order.