Glove Compartment Lamp (W6)

Glove Compartment Lamp (W6)

Removing






- Turn the light switch into the "0" position.

- Press in the catch - 1 - using a flat screwdriver and pry out the glove compartment lamp - 2 -.

- Disconnect the electrical connector - 3 -.

- To replace the bulb, release the retaining clips - arrows - and remove the cover - 1 - over the bulb.






- Remove the bulb - 1 - on the rear side of the glove compartment light from the socket - 2 -.






Installing

Install in reverse order of removal, observing the following:

- Connect the electrical connector.

- Insert the glove compartment lamp into the opening and engage on the opposite side.