Light Switch Trim

Light Switch Trim

Removing






- Remove the side cover on the driver side instrument panel. Refer to => [ Instrument Panel Side Cover ] Instrument Panel Side Cover.

- Remove the driver side instrument panel cover. Refer to => [ Driver Side Instrument Panel Cover ] Driver Side Instrument Panel Cover.

- Unclip the instrument cluster gap cover from the instrument panel. Refer to => [ Instrument Cluster Gap Cover ] Instrument Cluster Gap Cover.

- Remove the light switch.

- Vehicles with headlamp range control: Remove the headlamp setting unit (E102).

- Remove the bolts - arrows - and the light switch trim - 1 -.

Installing

To install, perform the steps used in removal in reverse order.

For the correct tightening specifications, refer to => [ Instrument Panel Assembly Overview ] Instrument Panel Assembly Overview.