Left Footwell Vents

Left Footwell Vents

- Move the driver seat as far back as possible.

- Turn off the ignition.

- Remove the storage compartment on driver's side.

- Disconnect the terminal - C - from the Footwell Vent Temperature Sensor (G192) / Left Footwell Vent Temperature Sensor (G261).






- Remove screws - A -.

- Left footwell vent - B -, removing

Installing

Installation is carried out in the reverse order while observing the following.

- Switch on the ignition.

- Check the Climatronic control module (J255) DTC memory and erase any displayed malfunctions if necessary. Refer to the Vehicle diagnostic tester in "Guided Fault Finding".