Diagram 14/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Battery, Battery monitoring control module, Battery interrupt igniter, Fuse 2 (on fuse panel A)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

A - Battery

C - Generator

E1 - Light switch

J234 - Airbag control module Overview of Control Modules in interior of vehicle

J367 - Battery monitoring control module Control Modules in rear part of vehicle, overview

N253 - Battery interrupt igniter Overview Of Fuses

SA2 - Fuse 2 (on fuse panel A) Overview Of Fuses

T2x - Double connector

T2y - Double connector

T100 - 100-pin connector

(500) - Terminal 30 threaded connection 1 (on relay panel) Overview Of Connector Stations

(501) - Terminal 30 threaded connection 2 (on relay panel) Overview Of Connector Stations

(624) - Ground connection near starter battery Locations

(B299) - Positive connection 3 (30) (in main wiring harness)

(D50) - Positive connection (30) (in engine compartment wiring harness)

* - Diameter depends on equipment

Next Diagram 14/3 (Tracks 15-28)