Diagram 47/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Humidity sensor, Automatic dimming interior rearview mirror





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G355 - Humidity sensor Locations Pass Compartment A/C Components

G399 - Light recognition sensor Headlight Assistant and Humidity Sensor Overview

J393 - Comfort system central control module Control Modules in rear part of vehicle, overview

J533 - Data bus on board diagnostic interface Overview of Control Modules in interior of vehicle

J844 - Automatic high beam assist control module Locations Headlight Assistant and Humidity Sensor Overview

SC1 - Fuse 1 (on fuse panel C) Overview Of Fuses

ST2 - Fuse panel 2

T6bb - 6-pin connector

T8c - 8-pin connector

T17c - 17-pin connector, black Overview Of Connector Stations

T20d - 20-pin connector Locations

T32c - 32-pin connector Locations

W1 - Front interior lamp

Y7 - Automatic dimming interior rearview mirror Overview of Control Modules in interior of vehicle

(277) - Ground connection 3 (in interior wiring harness)

(639) - Ground connection on left A-pillar Locations

(B528) - LIN bus connection 1 (in main wiring harness)

(B668) - CAN bus extended high connection 2 (in main wiring harness)

(B669) - CAN bus extended low connection 2 (in main wiring harness)

* - Refer to applicable wiring diagram for fuse positions

*2 - Only for vehicles with lane assist

*3 - Only for vehicles with a humidity sensor

Next Diagram 47/3 (Tracks 15-28)