Diagram 82/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Lane change assistance control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J533 - Data bus on board diagnostic interface Overview of Control Modules in interior of vehicle

J769 - Lane change assistance control module Control Modules in rear part of vehicle, overview Lane Assist System

T12h - 12-pin connector

T16v - 16-pin connector, brown

T17f - 17-pin connector Overview Of Connector Stations

T20d - 20-pin connector Locations

(51) - Ground connection in luggage compartment, right Locations

(249) - Ground connection 2 (in interior wiring harness)

(B108) - CAN bus extended high connection 1 (in main wiring harness)

(B109) - CAN bus extended low connection 1 (in main wiring harness)

(B665) - CAN bus extended high connection 1 (in instrument panel wiring harness)

(B666) - CAN bus extended low connection 1 (in instrument panel wiring harness)

(X171) - Connection (15) (in rear bumper wiring harness)

* - Only for vehicles with lane assist

Next Diagram 82/3 (Tracks 15-28)