Rear Seat Backrest Cover, Removing From Cushion

Rear Seat Backrest Cover, Removing from Cushion

Special tools, testers and auxiliary items required

• Upholstery Clip Pliers (V.A.G 1634)

Separating






- Remove the cover and cushion on the rear seat backrest. Refer to => [ Rear Seat Backrest Cover and Cushion ] Rear Seat Backrest Cover and Cushion.

- Remove the cover - 1 - from the upholstery - 2 - as far as possible.

- Cut through clips - 3 - with pliers.

- Remove cover from cushion.

Assembling

Installation is reverse of removal, but note the following:

- When installing new upholstery clips, use (V.A.G 1634).