Seat Angle Adjuster Assembly Overview

Seat Angle Adjuster Assembly Overview






1 Handle

• For seat inclination adjustment

• Removing and installing, refer to => [ Seat Angle Adjustment Handle ] Seat Angle Adjustment Handle

2 Retaining Clip

• Replace the seat angle adjustment handle each time it is removed

• Installation position => [ The springs (quantity: 2) on the clip must be on the inner side of the lever. ] Seat Angle Adjustment Handle

3 Bolt

• 6.5 Nm

• Self-locking

• Always replace if removed

• Threaded hole for screws must be cleaned, for example, with thread cutter

4 Shoulder Pin

• 6 Nm

• Self-locking

• Always replace if removed

• Threaded hole for shoulder pin must be cleaned, for example, with thread cutter

5 Seat Angle Adjustment

• Removing and installing, refer to => [ Seat Angle Adjuster ] Seat Angle Adjuster