Seal

Seal

Removing






- Remove the outer and inner window shaft strips. Refer to => [ Outer/Inner Window Shaft Strip ] Outer/Inner Window Shaft Strip.

- Remove the bolt - 4 -.

- Pull the convertible top compartment cover seal - 3 - off the body seam - arrows -.

Installation

• Tightening specifications, refer to => [ Seal Overview ] Seal Overview.

Install in reverse order of removal. Note the following:

- The front side of the small seal - 1 - must be line up with the seam - 2 - in the body panel.

- Install the outer and inner window shaft strips. Refer to => [ Outer/Inner Window Shaft Strip ] Outer/Inner Window Shaft Strip.

Route the water drain hose






- Route the water drain hose downward and insert it into the sidewall with the grommet.

- Secure the water drain hose with the clip - 3 -.