Convertible Top Compartment Cover Locking Motor (V222)

Convertible Top Compartment Cover Locking Motor (V222)

Removing






- Open the convertible top until the displayed position of the top and the convertible top compartment cover is reached.

- Disconnect the connector - 1 -.






- Remove the screws - arrows - and remove the convertible top compartment cover locking motor - 2 -.

Installation

• For the correct tightening specifications, refer to => [ Adjusting Buffer, Locking Motor and End Plate Overview ] Adjusting Buffer, Locking Motor and End Plate Overview.

Install in reverse order of removal.