Steering Column Switch Module Lower Trim Panel

Steering Column Switch Module Lower Trim Panel

Removing






- Remove the upper steering column switch module trim. Refer to => [ Steering Column Switch Module Upper Trim Panel ] Steering Column Switch Module Upper Trim Panel.

- Rotate the steering wheel 90° out of the straight position.

- Remove the bolts - 1 - and - 2 -.

• If bolts - 1 - and - 2 - are not accessible, steering wheel must be removed for further work.

- Remove screw - 4 - and lower steering column switch module trim - 3 -.

Installing

To install, perform the steps used in removal in reverse order.

For the correct tightening specifications, refer to => [ Steering Column Switch Module Trim Assembly Overview ] Steering Column Switch Module Trim Assembly Overview.