Sun Visor Center Bracket

Sun Visor Center Bracket

Removing






- Disengage the sun visor in the center of the vehicle at the center bracket and swing it to the side.

- Pry off the cover - 1 - with a screwdriver - arrow -.

- Remove the screws - 3 - and remove the sun visor center mount - 2 -.

Installing

Installation is performed in the reverse of removal, but note the following:

- The sun visor cannot be installed until the roof trim has been completely clipped in.

- Replace screws.

For the correct tightening specifications, refer to => [ Sun Visor Assembly Overview ] Sun Visor Assembly Overview.