Rear Center Console Trim

Rear Center Console Trim

Removing






- Vehicles with a storage compartment: remove the rear storage compartment inside the center console. Refer to => [ Center Console Rear Storage Compartment ] Center Console Rear Storage Compartment.

- Vehicles with vents: remove the rear vent. Refer to => [ Rear Vent ] Rear Vent.

- Remove the bolt - 2 -.

- Carefully unclip the trim - 3 - starting at the top - arrows - using a small screwdriver.

- Tilt the upper trim downward while releasing the tab - 1 - and removing from the center console.

- Disconnect the electrical connectors, if applicable.

- Vehicles with converter with socket, 12 V-230 V (U13) : release the tabs - arrows 1 - and remove the 230 V socket - arrow 2 -.






Installing

Installation is reverse of removal, but note the following:

- Insert the trim at the bottom, tilt it forward and clip it in.

- Press the center console rear trim onto the center console until it engages audibly.

For the correct tightening specifications, refer to => [ Center Console Assembly Overview ] Center Console Assembly Overview.