Rearview Camera System, Calibrating

Rearview Camera System, Calibrating

After performing service work on the vehicle, it may be necessary to calibrate the rearview camera system. In detail, this is the case after:

• Rearview camera (R189) , removing and installing

• Rearview camera system control module (J772) , removing and installing

• Collision repairs on rear lid

• Axle alignment

• Rear Axle Repairs

Calibration Requirements

• The camera lens must be clean.

• The vehicle must be standing on a firm and level surface.

• There must be sufficient open space around the vehicle.

• The parking brake must be set.

• The steering wheel must be in the 0 position and the wheels must be straight.

• All doors and the rear lid must be closed.

• No one should be in the vehicle.

• The vehicle must not be loaded (curb weight).

• Before each calibration: Turn on the ignition.