Drive Plate

Drive Plate

Special tools, testers and auxiliary items required

• Counter Hold Tool (10-201)

Removing






• The transmission is removed.

- Use the (10 - 201) to loosen the bolts.

- Remove the bolts, drive plate and sensor wheel.

Installing

Install in reverse order, paying attention to the following:

• For the correct tightening specifications, refer to => [ Drive Plate Overview ] Drive Plate Overview.

• Replace bolts that are tightened to the specification.

- Be careful of the alignment bushings during installation.

- Reposition the (10 - 201) to tighten the bolts.