Steering Wheel With Airbag

Steering Wheel with Airbag

Removing

- Set the wheels to the straight ahead position.

- Position steering wheel as far back as possible. Use the entire steering column adjustment range to do this.

- Install the airbag.

• Removal and installation of steering wheel must take place in the center position (wheels in straight-ahead position).

- Remove bolt - 2 -.






- Mark position of steering wheel/column with a felt-tip pen.

- Remove steering wheel - 3 - from steering column.

Installing

Especially Observe the Following During Installation:

Before positioning the steering wheel, make sure the wheels are in the straight position.

- When installing removed steering wheel: Make sure that markings on the steering column/wheel align.

- When installing a new steering wheel (without marking): Steering wheel must be position in center position (steering wheel spoke must be horizontal and wheels in straight-ahead position).

- Install steering wheel.

- Install the airbag unit.

- Perform road test.

- If steering wheel is crooked, remove it again and rotate it on steering column splines.

- Tighten new steering wheel bolts.