Front Axle Toe Angle, Checking and Adjusting

Front Axle Toe Angle, Checking and Adjusting

- Loosen lock nut - A -.

- Adjust toe on left and right-hand wheels with hex - B -.






Be sure that boots are not twisted after turning tie rods!

Twisted boots wear out quickly.

- Tighten lock nut - A -, - item 2 - => [ (Item 2) Nut ] Overhaul and check toe-in again.

After tightening lock nut - A - it is possible that the value deviates slightly.

If the measured toe nevertheless lies within the tolerance, the adjustment is correct.