Diagram 93/21 (Tracks 267-280)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Oxygen sensor after three way catalytic converter, Oxygen sensor 2 after catalytic converter, Engine control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F125 - Multifunction transmission range switch Locations

G130 - Oxygen sensor after three way catalytic converter Locations

G131 - Oxygen sensor 2 after catalytic converter Locations

J518 - Access/start authorization control module Overview Of Control Modules Access/Start Authorization System Component Overview

J623 - Engine control module Overview Of Control Modules

S15 - Fuse 15 (on fuse panel)

T4r - 4-pin connector, black

T4s - 4-pin connector, brown

T10c - 10-pin connector, Left plenum chamber E-box connector station Overview of Connector Stations

T10p - 10-pin connector

T20e - 20-pin connector Locations

T94 - 94-pin connector Locations

Z29 - Heater for oxygen sensor 1 after catalytic converter

Z30 - Heater for oxygen sensor 2 after catalytic converter

(B482) - Connection 18 (in main wiring harness)

(D107) - Connection (5) (in engine compartment wiring harness)

Previous Diagram 93/20 (Tracks 253-266)

Next Diagram 93/22 (Tracks 281-294)