Diagram 93/14 (Tracks 169-182)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Reduced oil pressure switch, Intake manifold runner position sensor, Engine control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F22 - Oil pressure switch Locations

F378 - Reduced oil pressure switch Locations

G336 - Intake manifold runner position sensor 4.2L Gasoline, BAR Overview

G512 - Intake manifold runner position sensor 2 4.2L Gasoline, BAR Overview

J623 - Engine control module Overview Of Control Modules

T10m - 10-pin connector, Left plenum chamber E-box connector station Overview of Connector Stations

T14f - 14-pin connector, in the engine compartment, right

T14l - 14-pin connector, in the engine compartment, left

T17d - 17-pin connector, Left plenum chamber E-box connector station Overview of Connector Stations

T94 - 94-pin connector Locations

(316) - Sensor ground connection 2 (in engine wiring harness)

(D190) - Connection 3 (5V) (in engine wiring harness)

* - 2,6 bar

*2 - 0.9 bar

Previous Diagram 93/13 (Tracks 155-168)

Next Diagram 93/15 (Tracks 183-196)