Coolant Fan (V7)/Coolant Fan 2 (V177)

Coolant Fan (V7)/Coolant Fan 2 (V177)

Removing






- Remove fan shroud. Refer to => [ Fan Shroud ] Service and Repair.

- Free up the wires.

- Remove the bolts - 1, 2, 3, 4, 8 - and then remove the coolant fan 2 and Coolant Fan Control (FC) module 2 (J671).

- Remove bolts - 5, 6, 7 - and then remove the coolant fan and the Coolant Fan Control (FC) module (J293).

Installing

Install in reverse order, paying attention to the following:

• For the correct tightening specifications, refer to => [ Fan Shroud and Coolant Fan Overview ] Fan Shroud and Coolant Fan Overview.

- Install fan shroud. Refer to => [ Fan Shroud ] Service and Repair.