Diagram 60/24 (Tracks 309-322)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Rear lid lock cylinder unlock button, Comfort system central control module, High-mounted brake lamp bulb, Fuel filler door unlock motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

C24 - Suppressor

F248 - Rear lid lock cylinder unlock button

J234 - Airbag control module Overview Of Control Modules

J393 - Comfort system central control module Overview Of Control Modules

J623 - Engine control module Overview Of Control Modules

M25 - High-mounted brake lamp bulb

T4ac - 4-pin connector

T6e - 6-pin connector, Coupling point for rear lid Overview of Connector Stations

T6k - 6-pin connector, Left plenum chamber E-box connector station Overview of Connector Stations

T10g - 10-pin connector

T10r - 10-pin connector, Coupling point for rear lid Overview of Connector Stations

T15a - 15-pin connector

T32d - 32-pin connector

T75 - 75-pin connector Locations

V155 - Fuel filler door unlock motor Locations

X - License plate lamp

(98) - Ground connection (in rear lid wiring harness)

(658) - Ground connection 2 near left rear window Locations

(668) - Ground connection 2 on left D-pillar Locations

(Q22) - Connection 1 (in rear lid wiring harness)

* - Refer to applicable engine wiring diagram

*2 - Depending on equipment

Previous Diagram 60/23 (Tracks 295-308)

Next Diagram 60/25 (Tracks 323-336)