Hood Weatherstrip: Service and Repair

Hood Seal






1 Gasket For Lock Carrier

• Apply gasket at left and right on foam piece.

• When doing this, make sure it is applied without gaps.

• Compress excess length of gasket along lock carrier.

2 Right Sealing Profile

• Self-adhering, adhesion surfaces must be free of dust and grease.

3 Gasket For Plenum Chamber

• Apply gasket at left and right on foam piece.

• When doing this, make sure it is applied without gaps.

• Compress excess length of gasket along front panel of plenum chamber.

4 Left Sealing Profile