Spoiler: Service and Repair

Rear Lid Spoiler






1 Spoiler

• Before removal, rear lid trim must be removed.

• Disconnect electrical connectors to antennas or high-mounted brake light.

• Remove nuts - 3 - and remove spoiler with spreader clips - 6 - from rear lid.

2 Sealing Band

• Self-adhesive

3 Hex Nut

• 4 Nm

4 Adhesive Sealing Material

5 Rear Window

6 Clip

Bolting Points






- Before installation, connect antenna cable and brake light cable.

- Press spoiler - 1 - through holes on rear lid - 2 - allow it to engage with clips.

- Seal - 4 - must lie as shown on rear lid or rear window.

- Tighten hex screws - 3 - to 4 Nm.