Gear Oil Level In the Transfer Case, Checking

Gear Oil Level in the Transfer Case, Checking

Special tools, testers and auxiliary items required

• Oil Collecting and Extracting Device (V.A.G 1782)

Procedure

• Observe general repair notes, refer to => [ Repair Information ] Transfer Case 0BU, Front Final Drive 0BM, 0C1 and 0BN, Rear Final Drive 0B (0C8A,0BNH,0BPH,0BMV,0C1V Transmission).

• The vehicle must be perfectly horizontal when checking the fluid level.

- Place the (V.A.G 1782) underneath the transfer case.

- Remove the transmission fluid filler plug - 1 -.






• The oil level is correct if the transfer case is filled up to the lower edge of the oil fill hole - 1 -.

- If necessary, top off the transmission fluid; specification, refer to the Parts Catalog.

Tightening Specification