Fluid Pan: Service and Repair

Oil Pan

Removing






- Draining the ATF. Refer to => [ ATF, Draining ] ATF, Draining.

- Remove the noise insulation bracket.

- Remove the ATF pan bolts - 2 - diagonally and the ATF pan.

Installing






Install in reverse order of removal. Note the following:

- Clean all magnets in oil pan recesses. Make sure the magnets touch the ATF pan completely.

- Install the ATF pan with a new gasket - 1 -.

- Make sure all spacer sleeves - 2 - are completely inside the new seal - 1 -.

- Tighten the ATF oil pan bolts diagonally and in several steps.

- Fill the ATF. Refer to => [ ATF, Filling ] ATF, Filling.

Tightening Specifications: