Right Luggage Compartment Relay and Fuse Panel

Right Luggage Compartment Relay and Fuse Panel

Removing






- With ignition switched off, disconnect battery Ground (ND) wire. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove relay or control modules, then unclip respective relay carrier.

- Release retaining clips - arrows - and press fuse panels - 1, 2, 4 - back out of relay and fuse panel.

- Remove the nuts - 3 - and - 5 - and then remove the relay and fuse panel.

- Unlock the release and remove from the fuse carrier, if equipped.






- Remove the fuses from the fuse panel.

- Release retaining clips - arrows - and remove the cover from the fuse panel.

- Remove connector retaining strip - 1 - - arrow - and remove connectors from plug-in socket.






• Precise assignment of relay and fuse panel can be seen from appropriate current flow diagram.

Installing

Install in reverse order of removal, observing the following:

- Connect battery. Refer to => [ Connecting ] Battery, Disconnecting and Connecting.

Tightening Specifications