Side Curtain Airbag Assembly Overview

Head Curtain Airbag with Driver/Passenger Head Curtain Airbag Igniter N251 and N252

• Follow all safety precautions when working on pyrotechnic components. Refer to=> [ Restraint System Components, Safety Precautions and General Information ] Restraint System Components, Safety Precautions and General Information.

• Note the additional safety precautions when working on the side curtain airbag. Refer to => [ Head Curtain Airbag, Additional Safety Precautions ] Head Curtain Airbag, Additional Safety Precautions.






1 Head curtain Airbag

• Removing and Installing, refer to => [ Driver Side and Passenger Side Curtain Airbag Igniter N251 and N252 ] Side Curtain Airbag, Servicing

2 Connector

• For side curtain airbag

• Disconnecting and connecting => [ Driver Side and Passenger Side Curtain Airbag Igniter N251 and N252 ] Side Curtain Airbag, Servicing

3 Bolt

• 5 Nm

• Self-locking

• Replacing

• Threaded holes for screws must always be cleaned (for example, with thread cutter)

4 Cap nut

• on ground bolt

• 9 Nm

5 Limiting strap

• In the front on the head curtain airbag

• Must not cross with the wiring harness