Fog Lamp

Fog Lamp

Removing

- Switch off ignition and remove ignition key.

- Turn light switch into "0" position.

Vehicles Without S Line Equipment:






- Remove air intake grille - 1 - in lower part of bumper cover - arrows -.

Vehicles With S Line Equipment:






- Remove the air inlet grille - 1 - in the lower part of the bumper cover in the sequenced shown - arrow A - and - arrow B -.

All Vehicles






- Remove screws - arrows - and remove fog lamp housing from bumper cover.

- Disconnect the connector.

Installing

Install in reverse order of removal, observing the following:

- Adjusting fog lamps, refer to => [ Fog Lamps, Adjusting ] Adjustments.

Tightening Specifications