Instrument Panel Covers on Driver Side Assembly Overview

Instrument Panel Covers on Driver Side Assembly Overview






1 Left mount

• Driver side lower instrument panel cover

2 Connector, 16-pin (T16)

• Diagnostic connector

3 Right mount

• Driver side lower instrument panel cover

• Clipped into accelerator pedal module

4 Bolt

• Tightening specification - 1.4 Nm

5 Threaded clip

• Quantity: 2

6 Upper instrument panel cover, driver side

• Identified as knee bar

• Removing and Installing, refer to => [ Upper Instrument Cover, Driver Side Knee Bar ] Upper Instrument Cover, Driver Side Knee Bar

7 Clips

• Quantity: 2

• Before installing the upper instrument panel cover on the driver side, the knee bars must be installed in the cut-outs in the instrument panel

• Note location => [ Installation position ] Upper Instrument Cover, Driver Side Knee Bar

8 Bolt

• Tightening specification - 1.4 Nm

9 Footwell light

10 Driver side lower instrument panel cover

• Removing and Installing, refer to => [ Lower Driver Side Instrument Panel Cover ] Lower Driver Side Instrument Panel Cover