Diagram 60/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Battery, Terminal 15 power supply relay, Battery monitoring control module, Battery interrupt igniter, Battery jump start terminal





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

A - Battery

B - Starter

C - Generator

J234 - Airbag control module Overview Of Control Modules

J329 - Terminal 15 power supply relay Overview Of Relay

J367 - Battery monitoring control module 4.2L Gasoline, BAR Overview Overview Of Control Modules

N253 - Battery interrupt igniter Overview Of Fuses

SD1 - Fuse 1 (on fuse panel D) Overview Of Fuses

SD2 - Fuse 2 (on fuse panel D) Overview Of Fuses

SD3 - Fuse 3 (on fuse panel D) Overview Of Fuses

SD4 - Fuse 4 (on fuse panel D) Overview Of Fuses

SD5 - Fuse 5 (on fuse panel D) Overview Of Fuses

T2 - Double connector

T2au - Double connector

T2az - Double connector

T10f - 10-pin connector, Left plenum chamber E-box connector station

TV22 - Terminal 30 wire junction 2

T75 - 75-pin connector Locations

U6 - Battery jump start terminal

(624) - Ground connection near starter battery

(B177) - Connection 61 (in interior wiring harness)

(D50) - Positive connection (30) (in engine compartment wiring harness)

* - Relay and fuse carrier under the driver seat

Next Diagram 60/3 (Tracks 15-28)