Release

Release

Removing

- Remove the center armrest trim. Refer to => [ Center Armrest Trim ] Center Armrest Trim.

- Remove the center armrest support base trim. Refer to => [ Center Armrest Support Base 1 and 2 Trim ] Center Armrest Support Base 1 and 2 Trim.

- Remove center armrest upholstery. Refer to => [ Center Armrest Upholstery ] Center Armrest Upholstery.

- Remove the right gas-filled strut. Refer to => [ Gas-Filled Strut ] Gas-Filled Strut.

- Remove the cable ties - 1 -.






- Loosen the lock nuts - 2 - and disengage the cable - 5 -.

- Remove the trim - 4 -. "Be careful not to break the trim".

- Remove the cable completely - 2 -.

Installation

Install in reverse order of removal.

For the correct tightening specifications, refer to => [ Multibox Components Assembly Overview ] Multibox Components Assembly Overview

- Before installing the center armrest support base trim, adjust the cable. Refer to => [ Cable, Adjusting ] Cable, Adjusting.