Seat Belt Extraction Panel

Seat Belt Extraction Panel

Removing






- Remove the seat belt latching tongue securing clamps - 1 -.

- Beginning at the separation point - arrow -, turn belt extraction panel - 2 - clockwise to unclip it from the D-pillar trim.

- Remove belt webbing - 3 - from belt extraction panel - 2 -.

Installing

Installation takes place in reverse order of removal, securing clamps - 1 - must be clipped into installation position.

Securing clamp, clipping to belt extraction panel






- Clip securing clamp - 1 - into installation position on belt extraction panel tab - 2 - as shown in illustration.

• Securing clamp tabs - arrows - must engage in tab - 2 -.