Sun Visor

Sun Visor

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

Removing






- Disengage sun visor (rear sun visors on vehicles with double sun visor) in vehicle center at sun visor center bearing and fold it to side.

- Unclip sun visor center bearing cover with a small screwdriver and remove screw.

- Carefully unclip cover cap - 3 - with (3409).

- Remove screws - arrow A - and - arrow B -.

- Loosen sun visor - 1 - and - 2 - on vehicles with double sun visor from roof crossmember.

- Disconnect visor from wiring harness.

Installing

Install in reverse order of removal.

Tightening specifications, refer to => [ Sun Visor Overview ] Sun Visor Overview.