Front Floor Covering

Front Floor Covering

Removing

Follow all safety precautions when working on pyrotechnic components.

- Remove the front seats with the seat frames.

• Manual seat, refer to => [ Driver Seat Assembly Overview ] Driver Seat Assembly Overview.

• Memory seat, power seat and Comfort seat, refer to => [ Driver Seat Assembly Overview ] Driver Seat Assembly Overview.

- Remove the lower left and right A-pillar trim. Refer to => [ A-Pillar Trim, Lower Overview ] A-Pillar Trim, Lower Overview.

- Remove driver side and passenger side footwell covers. Refer to => [ Storage Compartments and Covers ] Storage Compartments and Covers.

- Remove the footrest cover. Refer to => [ Footrest Cover and Bracket Overview ] Footrest Cover and Bracket Overview.

- Remove any covers or trims for the connector station, foot vent, etc.

- Remove center console. Refer to => [ Center Console Assembly Overview ] Description and Operation.

- Remove 2 press buttons => [ (Item 3) Push Button ] Floor Covering Overview.

- Fold the floor covering lengthwise and remove it through a door.

Installing

Install in reverse order of removal. Note the following:

• Carefully install the floor covering in order to avoid damage.

- Slide the front floor covering all the way forward and secure the two press buttons => [ (Item 3) Push Button ] Floor Covering Overview.