Procedures

Windshield Wipers, Bringing Into Service Position

• If the windshield wiper motor is to be run during the work procedure, the hood must be closed, otherwise the voltage supply of the wiper motor will be interrupted.

Risk of damaging the hood by running the wipers back in basic position.

• Do not drive a vehicle with windshield wiper arms folded up.

• The windshield wipers automatically go back into their rest position when the wiper switch is activated or when driving faster than 6 km/h.

- Make sure the wiper blades are not frozen.

- Switch ignition on.

- Activate the menu entry windshield wiper "on" using the multimedia system control head. Refer to the vehicle Owner's Manual.

• The windshield wipers run into "service position".

- Switch ignition off.