Diagram 53/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Transmission fluid temperature sensor, Transmission input speed sensor, Parking lock sensor, Transmission control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G93 - Transmission fluid temperature sensor Locations

G182 - Transmission input speed sensor Locations

G195 - Transmission output speed sensor Locations

G747 - Parking lock sensor Locations

J217 - Transmission control module Locations

J393 - Comfort system central control module Locations

J623 - Engine control module Locations

N485 - Accumulator solenoid Locations

N486 - Parking lock solenoid Locations

N509 - Transmission fluid cooling valve Locations

SA1 - Fuse 1 (on fuse panel A) Overview Of Fuses

SA12 - Fuse 12 (on fuse panel A) Overview Of Fuses

SA13 - Fuse 13 (on fuse panel A) Overview Of Fuses

T2ad - Double connector

T16a - 16-pin connector

T17b - 17-pin connector, Left plenum chamber E-box connector station Locations

T32g - 32-pin connector Locations

(85) - Ground connection 1 (in engine compartment wiring harness)

(131) - Ground connection 2 (in engine compartment wiring harness)

(645) - Ground connection 1 on bulkhead [1][2]Ground Locations

(E26) - Selector lever P/N position connection (in Motronic multiform fuel injection wiring harness)

* - Refer to applicable engine wiring diagram

*2 - Only for vehicles with Start/Stop system

*3 - The color of the wires depends on vehicle equipment

Next Diagram 53/3 (Tracks 15-28)