Fluid Line/Hose: Service and Repair

Automatic Transmission Fluid Lines, Cleaning

Special tools, testers and auxiliary items required

• Oil Collecting and Extracting Device (V.A.G 1782)

• Hose diameter approximately 18 mm

• Compressed air gun, commercially available

• Protective goggles

Procedure

• Clean working conditions for the automatic transmission, refer to => [ Clean Working Conditions ] Clean Working Conditions.

- Before installing a replacement transmission, always clean out the ATF cooler and ATF pipes using compressed air (maximum 10 bar).

- Place the (V.A.G 1782) under the transmission.

• If extremely dirty ATF flows out when cleaning using compressed air, flush the ATF cooler and lines using clean ATF.