Tunnel Crossmember, Transmission Mount and Transmission Support Overview

Tunnel Crossmember, Transmission Mount and Transmission Support Overview






1 Bolt

• M10x55 8.8: 40 Nm

• M10x40 10.9: 70 Nm

2 Tunnel Crossmember

• Removing and installing, refer to => [ Tunnel Crossmember ] Tunnel Crossmember

3 Stop

• For the transmission mount

4 Transmission mount

• Removing and installing, refer to => [ Transmission Mount ] Transmission Mount

5 Bolt

• 40 Nm

6 Nut

• 20 Nm

• Only remove if the transmission mount must be separated from the transmission support

7 Bolt

• 40 Nm

8 Transmission Support

• Removing and installing, refer to => [ Transmission Support with Transmission Mount ] Transmission Support With Transmission Mount

9 Bolt

• 20 Nm plus an additional 90° turn

• Replace

• Only remove if the transmission mount must be separated from the transmission support

10 Nut

• 20 Nm