Steering Column Electronics Control Module (J527) and Electronic Ignition Lock Overview

Steering Column Electronics Control Module (J527) and Electronic Ignition Lock Overview






1 Ignition Key

2 Screw

• 0.5 Nm

3 Transport Protection

4 Steering Column Electronic Systems Control Module (J527)

• With Airbag spiral spring/return spring with slip ring (F138) , Steering angle sensor (G85)

• Removing and installing, refer to => [ Steering Column Electronic Systems Control Module (J527) ] Steering Column Electronic Systems Control Module (J527).

Risk of damaging coil connector.

• Coil connector with slip ring is not to be turned following removal.

• Connector assignment of Steering Column Electronic Systems Control Module (J527) => [ Steering Column Electronics Control Module (J527) Connector Assignment ] [1][2]Diagrams

5 Mount

• With Turn signal switch (E2) , Windshield wiper/washer switch (E22).

• On vehicles with cruise control with Cruise control switch (E45).

• Removing and installing, refer to => [ Turn Signal, Cruise Control Switch and Windshield Wiper and Washer Intermittent Switches (E2)/(E45)/(E22) ] Turn Signal, Cruise Control Switch and Windshield Wiper and Washer Intermittent Switches (E2)/(E45)/(E22).

6 Steering Column

7 Clamping Ring

8 Screw

• 6 Nm

9 Anti-Theft Immobilizer Reading Coil (D2)

• Removing and installing, refer to => [ Anti-Theft Immobilizer Reader Coil (D2) ] Anti-Theft Immobilizer Reader Coil (D2).

10 Mount

• For the Anti-theft immobilizer reading coil (D2).

• Removing and installing, refer to => [ Anti-Theft Immobilizer Reader Coil Mount ] Anti-Theft Immobilizer Reader Coil Mount.

11 Screw

• 3 Nm

12 Screw

• 3 Nm