Fuse Panels, Instrument Panel, Left Side

Fuse Panels, Instrument Panel, Left Side

Removal






- Turn off the ignition and disconnect the ground cable from the battery. Refer to => [ Battery, Disconnecting and Connecting ] Service and Repair.

- Remove the driver side instrument panel cover.

- Release the clamp - 1 - - arrow - and remove the fuse panels - 2, 3 and 4 - from fuse panel B.

- Unlock the release and remove from the fuse carrier.






- Remove the fuses from the fuse panel.

- Open the clips - arrows - and remove the fuse panel cover.

- Pull off retaining strip - 1 - for harness connectors - arrow - and remove harness connectors from connector socket.






• Check the exact connector assignment in the current wiring diagram.

Installation

Install in reverse order of removal. Note the following:

- Install the driver side instrument panel cover.

- Connect the battery. Refer to => [ Connecting ] Service and Repair.