Battery Overview

Battery Overview

Observe notes on contact corrosion, refer to => [ Contact Corrosion ] Contact Corrosion.






1 Retaining Bracket

2 Screw

• 18 Nm

3 Battery

• Disconnecting and connecting, refer to => [ Battery, Disconnecting and Connecting ] Service and Repair.

• Removing and installing, refer to => [ Battery ] Battery.

4 Screw

5 Nut

• 5 Nm

6 Main Fuse Panel

• Disconnecting and connecting, refer to => [ Battery ] Battery.

• Overview, refer to => [ Engine Compartment E-Box, Wire Junction, Fuse Holder and Battery Overview ] Engine Compartment E-Box, Wire Junction, Fuse Holder and Battery Overview.

7 Negative Terminal Cover

8 Positive Terminal Cover

9 Retainer

• For the vehicle tool kit cover.

10 Screw

• 18 Nm

• Quantity 4

11 Electrical Wire

• For the Battery Monitoring Control Module (J367).

• Follow the sequence when connecting the ground cable. Refer to => [ Connecting ] Service and Repair.

12 Ground Wire With Battery Monitoring Control Module (J367)

• Disconnecting and connecting, refer to => [ Battery, Disconnecting and Connecting ] Service and Repair.

• Removing and installing, refer to => [ Ground Cable with Battery Monitoring Control Module ] Ground Cable With Battery Monitoring Control Module.

13 Nut

14 Screw

15 Nut

• 5 Nm

16 Central Venting System Hose

17 Grommet

• For the hose for the central venting system.