Fuel Level Sensor (G)

Fuel Level Sensor (G)

Removing






- Follow all safety precautions. Refer to => [ Safety Precautions ] Fuel Supply System.

- Follow the guidelines for clean working conditions. Refer to => [ Clean Working Conditions ] Fuel Supply System.

- Remove the fuel delivery unit. Refer to => [ Fuel Delivery Unit ] Fuel Delivery Unit.

- Pull the fuel level sensor first slightly toward the inside and then upward and remove it - arrows -.

- Release the retaining tabs - arrows - with a screwdriver, if necessary.






- Disconnect the connector from the locking flange.

Installing

Install in reverse order of removal. Note the following:

- Insert the fuel level sensor in the guides on the fuel delivery unit and push upward until it engages.

- Connect the connector. Make sure it is secure.

- Install the fuel delivery unit. Refer to => [ Fuel Delivery Unit ] Fuel Delivery Unit.

- Connect the battery. Be sure to read the procedures after connecting the battery.